Rancang Bangun Sistem Pemantauan Kualitas Udara Berbasis Internet of Things dan Dashboard Analitik

Authors

  • Khosi’in Khosi’in UIN Fatmawati Sukarno Bengkulu Author

DOI:

https://doi.org/10.67319/kuadran.v1i1.3

Keywords:

Internet of Things, air quality monitoring, PM2.5, ISPU, low-cost sensor calibration, dashboard

Abstract

Purpose: This study designs an Internet of Things (IoT) system for monitoring fine particulate matter (PM2.5) and an analytical dashboard that converts low-cost sensor readings into the Indonesian Air Pollution Standard Index (ISPU).

Design/Methodology: A system development approach was used to define requirements and design a five-layer architecture consisting of sensing nodes (PMS5003, DHT22, ESP32), MQTT transmission, a Python processing service, a time-series database, and a dashboard. The data pipeline was verified through software-in-the-loop testing on a seven-day synthetic dataset that reproduces sensor humidity bias, noise, spikes, power outages, and 1.5% packet loss. Evaluation covered data completeness, outlier filtering, calibration accuracy, ISPU category agreement, and early-warning performance; no field measurements are claimed.

Findings: The pipeline retained 97.0% of valid hourly records. A Hampel filter (window 31, threshold 6) detected all 44 injected spikes with 69.8% precision. Multiple regression calibration using PM2.5, relative humidity, and their interaction raised R² on the test period from −1.91 to 0.988 and reduced RMSE from 30.06 to 1.91 µg/m³, whereas simple linear calibration reached only R² = 0.768. Agreement of hourly ISPU categories with the reference increased from 45.1% to 97.8%, and the alert rule detected both pollution episodes without false alarms, compared with 14 false alarms when raw data were used. The pipeline tolerated up to 10% packet loss without loss of information, but availability of the 24-hour ISPU collapsed when loss reached 20–30%.

Practical Implications: The design provides a low-cost, reproducible blueprint for campuses and local governments, provided that sensors are co-located with reference instruments before deployment.

Originality/Value: The study integrates hardware design, ISPU computation based on Ministerial Regulation No. 14/2020, humidity-aware calibration, and dashboard analytics in one tested workflow

References

Al-Fuqaha, A., Guizani, M., Mohammadi, M., Aledhari, M., & Ayyash, M. (2015). Internet of Things: A survey on enabling technologies, protocols, and applications. IEEE Communications Surveys & Tutorials, 17(4), 2347–2376. https://doi.org/10.1109/COMST.2015.2444095 DOI: https://doi.org/10.1109/COMST.2015.2444095

Atzori, L., Iera, A., & Morabito, G. (2010). The Internet of Things: A survey. Computer Networks, 54(15), 2787–2805. https://doi.org/10.1016/j.comnet.2010.05.010 DOI: https://doi.org/10.1016/j.comnet.2010.05.010

Barkjohn, K. K., Gantt, B., & Clements, A. L. (2021). Development and application of a United States-wide correction for PM2.5 data collected with the PurpleAir sensor. Atmospheric Measurement Techniques, 14, 4617–4637. https://doi.org/10.5194/amt-14-4617-2021 DOI: https://doi.org/10.5194/amt-14-4617-2021

Castell, N., Dauge, F. R., Schneider, P., Vogt, M., Lerner, U., Fishbain, B., Broday, D., & Bartonova, A. (2017). Can commercial low-cost sensor platforms contribute to air quality monitoring and exposure estimates? Environment International, 99, 293–302. https://doi.org/10.1016/j.envint.2016.12.007 DOI: https://doi.org/10.1016/j.envint.2016.12.007

Chandola, V., Banerjee, A., & Kumar, V. (2009). Anomaly detection: A survey. ACM Computing Surveys, 41(3), 15. https://doi.org/10.1145/1541880.1541882 DOI: https://doi.org/10.1145/1541880.1541882

Few, S. (2006). Information dashboard design: The effective visual communication of data. O’Reilly Media.

Gubbi, J., Buyya, R., Marusic, S., & Palaniswami, M. (2013). Internet of Things (IoT): A vision, architectural elements, and future directions. Future Generation Computer Systems, 29(7), 1645–1660. https://doi.org/10.1016/j.future.2013.01.010 DOI: https://doi.org/10.1016/j.future.2013.01.010

Hampel, F. R. (1974). The influence curve and its role in robust estimation. Journal of the American Statistical Association, 69(346), 383–393. https://doi.org/10.1080/01621459.1974.10482962 DOI: https://doi.org/10.1080/01621459.1974.10482962

Harris, C. R., Millman, K. J., van der Walt, S. J., Gommers, R., Virtanen, P., Cournapeau, D., ... Oliphant, T. E. (2020). Array programming with NumPy. Nature, 585, 357–362. https://doi.org/10.1038/s41586-020-2649-2 DOI: https://doi.org/10.1038/s41586-020-2649-2

Hunter, J. D. (2007). Matplotlib: A 2D graphics environment. Computing in Science & Engineering, 9(3), 90–95. https://doi.org/10.1109/MCSE.2007.55 DOI: https://doi.org/10.1109/MCSE.2007.55

Karagulian, F., et al. (2019). Review of the performance of low-cost sensors for air quality monitoring. Atmospheric Environment, 213, 236–248. https://doi.org/10.1016/j.atmosenv.2019.05.057 DOI: https://doi.org/10.1016/j.atmosenv.2019.05.057

Kelly, K. E., Whitaker, J., Petty, A., Widmer, C., Dybwad, A., Sleeth, D., Martin, R., & Butterfield, A. (2017). Ambient and laboratory evaluation of a low-cost particulate matter sensor. Environmental Pollution, 221, 491–500. https://doi.org/10.1016/j.envpol.2016.12.039 DOI: https://doi.org/10.1016/j.envpol.2016.12.039

Kementerian Lingkungan Hidup dan Kehutanan. (2020). Peraturan Menteri Lingkungan Hidup dan Kehutanan Nomor P.14/MENLHK/SETJEN/KUM.1/7/2020 tentang Indeks Standar Pencemar Udara. Berita Negara Republik Indonesia Tahun 2020 Nomor 774.

Kumar, P., Morawska, L., Martani, C., Biskos, G., Neophytou, M., Di Sabatino, S., Bell, M., Norford, L., & Britter, R. (2015). The rise of low-cost sensing for managing air pollution in cities. Environment International, 75, 199–205. https://doi.org/10.1016/j.envint.2014.11.019 DOI: https://doi.org/10.1016/j.envint.2014.11.019

McKinney, W. (2010). Data structures for statistical computing in Python. Proceedings of the 9th Python in Science Conference, 56–61. DOI: https://doi.org/10.25080/Majora-92bf1922-00a

Morawska, L., et al. (2018). Applications of low-cost sensing technologies for air quality monitoring and exposure assessment: How far have they gone? Environment International, 116, 286–299. https://doi.org/10.1016/j.envint.2018.04.018 DOI: https://doi.org/10.1016/j.envint.2018.04.018

OASIS. (2019). MQTT version 5.0: OASIS standard. https://docs.oasis-open.org/mqtt/mqtt/v5.0/mqtt-v5.0.html

Pearson, R. K., Neuvo, Y., Astola, J., & Gabbouj, M. (2016). Generalized Hampel filters. EURASIP Journal on Advances in Signal Processing, 2016, 87. https://doi.org/10.1186/s13634-016-0383-6 DOI: https://doi.org/10.1186/s13634-016-0383-6

Snyder, E. G., et al. (2013). The changing paradigm of air pollution monitoring. Environmental Science & Technology, 47(20), 11369–11377. https://doi.org/10.1021/es4022602 DOI: https://doi.org/10.1021/es4022602

United States Environmental Protection Agency. (2022). Air sensor guidebook. https://www.epa.gov/air-sensor-toolbox

World Health Organization. (2021). WHO global air quality guidelines: Particulate matter, ozone, nitrogen dioxide, sulfur dioxide and carbon monoxide. WHO. https://www.who.int/publications/i/item/9789240034228

Zheng, T., et al. (2018). Field evaluation of low-cost particulate matter sensors in high- and low-concentration environments. Atmospheric Measurement Techniques, 11, 4823–4846. https://doi.org/10.5194/amt-11-4823-2018 DOI: https://doi.org/10.5194/amt-11-4823-2018

Published

2026-10-12

Issue

Section

Articles

How to Cite

Khosi’in, K. (2026). Rancang Bangun Sistem Pemantauan Kualitas Udara Berbasis Internet of Things dan Dashboard Analitik. KUADRAN: Jurnal Analitika Data Dan Ilmu Komputer, 1(1), 29-42. https://doi.org/10.67319/kuadran.v1i1.3